$249.99
John Deere Model 328, 338, 348 Parts
-
-
New OEM Needle Frame for John Deere Model 347 & 348 Square Balers
$699.99John Deere OEM part #AFH205973.
$699.99 -
Good Used Inspected Gear Box and Input Shaft (includes New Seals) for John Deere Models 336, 346, 327, 328
$1,899.99Fully inspected and includes 3 new seals- not a "pick and pull" part. Good used OEM part. Call for availability. NOTE: Please contact us for sh...
View full details$1,899.99 -
Large Drive Chain Sprocket for John Deere Model 336, 346, 327, 337, 328, 338 - Good Used Part
$40.99Good used John Deere OEM part #AE26326 (replaces part #AE13630 Does not fit on John Deere Models 347 and 348
$40.99 -
Tucker Shaft Roller (2-pc) for John Deere Model 328, 338, 348
$45.99OEM parts #FH312368 (inner) and #FH312373 (outer)
$45.99 -
Heavy Duty LH Spindle Axle Extension Assembly for Thrower-Equipped Models 336, 327, 337, 328, 338
$489.99New aftermarket part. Includes hub, new bearings, seals and races. Reinforced metal in housing and bolt plate. You’ll receive the assembly fully g...
View full details$489.99 -
New OEM Main Drive Sprocket for John Deere Baler Models 24-338
$59.9924 teeth, fits over spline on main drive shaft.
$59.99 -
$58.99
-
Knotter Drive Gear Bushing (set of 2) for John Deere Models 328, 338, 348
$27.99New John Deere OEM part #E15963- set of 2
$27.99 -
Pickup Gauge Wheel for John Deere Models 327, 337, 347, 328, 338, 348
$179.99Solid rubber- no inflation needed! New Aftermarket Part #3328 replaces John Deere OEM part #AE27688. AE10688
$179.99 -
Good Used Knotter Shaft for John Deere Baler Model 328, 338, 348
$219.99Good used John Deere OEM part #AE47094
$219.99 -
Good Used Auger Frame for John Deere Model 346, 347, 348
$429.99Good used John Deere OEM part #AFH202592 Call before ordering. Shipping is expensive- $250-$300
$429.99 -
OUT OF STOCK- Good Used Rear Yoke and Tube Cat. 4 for John Deere Models 346, 347, 338, 348
$299.99Good used John Deere OEM part #AE46716
$299.99 -
Main Drive Front 33 Tooth Sprocket for John Deere model 336, 346, 327, 337, 328, 338
$99.99New aftermarket part, replaces John Deere OEM part #AE26326
$99.99 -
Good Used Side Shield for Late Model John Deere Square Balers 328, 338, 348
$159.99Good used John Deere part #AFH206110. Late models include serial numbers 300,000 and up.
$159.99 -
Flywheel Nut for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$7.49New John Deere OEM part #14H875
$7.49 -
$2.99
-
0.036" Thick Plunger Strap for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$11.99New John Deere OEM part #FH312234
$11.99 -
Flange Nut for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$7.49New John Deere OEM part #E50118 replaces #FH312289
$7.49 -
Twine Box Lid Wedge for John Deere Model 336, 346, 327, 337, 347, 328, 338, 348
$109.99New Aftermarket Part replaces John Deere OEM part #E50345
$109.99 -
Tucker Shaft S-Hook for John Deere model 336-348
$1.99Attaches Tucker spring to shaft. New aftermarket part
$1.99 -
Good Used Twine Box Support Brackets for John Deere Model 336, 346, 327, 337, 347, 328, 338, 348
$56.99Good used John Deere OEM part #E44295 #E44297
$56.99 -
Good Used Twine Box Lid for John Deere Model 336, 346, 327, 337, 347, 328, 338, 348
$129.99Good used John Deere OEM part #AE73180-LID ONLY
$129.99 -
Feeder Fork Bearing (LH) with Lock Collar for John Deere model 336, 346, 327, 337, 347, 328, 338, 348, 467
$46.99New John Deere OEM parts #JD8552 + #JD8551
$46.99 -
Good Used Plunger Safety Stop Rod for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$81.99Good used John Deere OEM part # E54448. Includes front and back yoke (M80373).
$81.99 -
Good Used Bottom Cylinder Support Bracket for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$43.99Good used John Deere OEM part #AE13143
$43.99 -
$279.99
-
Good Used Secondary PTO Shaft Assembly for John Deere model 327, 328
$224.99VERY LIMITED INVENTORY- CALL BEFORE ORDERING! Includes new cross bearing.
$224.99 -
$399.99
-
Crank Side Shield for John Deere Square Baler Models 327, 337, 347 and Early 328, 338, 348
$139.99New Aftermarket part #3483- replaces John Deere part #AFH40643. Early 8 series models include serial numbers below 299,999.
$139.99 -
Plunger Safety Stop for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$74.99New Aftermarket part replaces OEM part #E1009. Includes new bushing.
$74.99 -
LH Spindle Axle Extension Assembly for Thrower-Equipped Models 336, 327, 337, 328, 338
$349.99Good used part.
$349.99 -
Good Used Bale Tension Spring for John Deere Models 14T
$69.99Manually adjust bale compression. Good used John Deere OEM part #274SE, includes OEM part #E20398 (lower spring plug) and #BP1762E (upper spring p...
View full details$69.99 -
Main Drive Sprocket (behind Slip Clutch) for John Deere Model 336, 346, 327, 337, 328, 338
$79.99John Deere OEM part #E19123 Does not fit on John Deere Models 347 and 348
$79.99 -
Pickup Belt For John Deere Models 347, 348
$79.99New aftermarket part- replaces John Deere OEM part #E16774
$79.99 -
$78.99
The latest (and last, so far) series of John Deere small square balers, Many improvements over the previous models, such as updated tucker finger assembly and 2-piece knotter frame. We carry a large inventory of new aftermarket, new and good-used OEM parts, and updated assemblies.