PTO Cross Bearing for John Deere Model 336, 327, 337, 328, 338
$33.99
New Aftermarket Part- replaces John Deere OEM AE22753
$33.99
John Deere Model 328, 338, 348 Parts
-
-
OUT OF STOCK- Auger Belt Shield for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$134.99Good used OEM Part #AE73404
$134.99 -
Tucker Finger for John Deere Model 328, 338, 348
$89.99New aftermarket part. Replaces John Deere OEM Part #AFH205877
$89.99 -
Feeder Fork Stripper for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$109.99New aftermarket part- replaces John Deere OEM #E43669
$109.99 -
Completely Rebuilt Knotter for John Deere Model 328, 338, 348, 468 Square Baler
$1,999.99New Frame, 90% New Parts Want a reliable, expertly rebuilt knotter? You can buy with confidence from Green Baler Parts After sending the original ...
View full details$1,999.99 -
$5.99 -
Single Knotter Brake for John Deere Square Baler Model 336, 346, 327, 337, 328 and 338 Square Baler
$67.99One needle/ knotter brake shoe with metal bracket. New Aftermarket Part #3460. Replaces John Deere OEM part #AE48552
$67.99 -
Twine Disc Tension Lever for John Deere Models 328, 338, 348
$49.99Only one needed. Not interchangeable with 6 and 7 series leaf springs. New John Deere OEM part #FH312374. For models 336, 327, 337, 347, click here
$49.99 -
Feeder Fork Chain for John Deere Baler Models 14T, 336, 346, 327, 337, 347, 338, 348
$129.99New aftermarket part.
$129.99 -
OUT OF STOCK- Good Used Pitman Arm with New Plunger Pin and Bushings for John Deere Models 336, 327, 337, 328, 338
$439.99Good used OEM pitman arm part #AE46492, new OEM Pitman Pin Bushing- E15566, and new Aftermarket Plunger Pin- 3405 (replaces FH312288)
$439.99 -
Pickup Hex Bearing with Flangettes Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$129.99Pickup arm bearing. New John Deere Baler OEM Part # AE28843
$129.99 -
Rear Clutch Plate for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$53.99New aftermarket part- replaces John Deere OEM Part #E38906 and #E57134
$53.99 -
2 Pc. Extendable Hay Wagon/Accumulator Drawbar for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$289.99New aftermarket part replaces John Deere OEM part #BE21896
$289.99 -
Stationary Knife Shim (Plastic) for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$14.99New plastic John Deere OEM part #E19707-0.25mm
$14.99 -
Drawbar Support Frame for John Deere Model 336, 346 ,327, 337, 347, 328, 338, 348
$849.99John Deere OEM Part #BE32440. Includes bolt and bushing. Needed for drawbar installation. (SUB FOR AE27318, AE30988 OR AE38409)
$849.99 -
Good Used Main Drive Sprocket (behind Slip Clutch) for John Deere Model 336, 346, 327, 337, 328, 338
$79.99Good used John Deere OEM part #E19123 Does not fit on John Deere Models 347 and 348
$79.99 -
Good Used Front Clutch Plate for John Deere Models 24, 224, 336, 346, 327, 337, 347, 328, 338, 348
$199.99Good used, tech-certified John Deere OEM Part #E38906 and #E57134
$199.99 -
OUT OF STOCK-Good Used Side Shield for John Deere Models 327, 337, early 8 series
$99.99OUT OF STOCK- John Deere good used OEM part #AE27423 For new aftermarket Side Shield, click here Picture is representative- actual part may not hav...
View full details$99.99 -
Intermittent Gear for John Deere Square Baler Models 328, 338, 348
$759.99New John Deere OEM Part #FH312371
$759.99 -
Bearing for Main Drive Chain Idler Sprocket for John Deere Model 24T, 224T, 336, 346, 327, 337, 328, 338
$7.99Bearing for New John Deere OEM part #JD8570 Does not fit on John Deere Models 347 and 348
$7.99 -
Main Drive Chain Idler Sprocket for John Deere Model 336, 346, 327, 337, 328, 338
$92.99Main Drive- New John Deere OEM part #AE13630 Does not fit on John Deere Models 347 and 348
$92.99 -
Auger Bearing Race for John Deere Models 336, 346, 327, 337, 347 and early 328, 338, 348
$49.99New aftermarket part #3508 replaces John Deere OEM part #E50308. Serial number break for part- Early models are < 965731.
$49.99 -
Twine Disc Holder for John Deere Models 14T, 24T, 336, 327, 337, 347, 338, 348
$189.99New OEM Part #FH312133
$189.99 -
OUT OF STOCK- Good Used Primary PTO Shaft & Yoke Assembly with New Cross Bearing for John Deere Model 336, 342, 346, 346WS, 327 337, 347, 328, 338, 348
$299.99Good used John Deere OEM assembly Part #AN104578 (used) and #E55209 (new) cross-bearing. Please provide model number and shaft width measurement (1...
View full details$299.99 -
Good Used Needle Frame for John Deere Model 336, 346, 327, 337, 328 & 338 Square Balers
$259.99Good used John Deere OEM Part #AFH205973, sub for #AE36620
$259.99 -
Rebuilt Wire Needle with New Roller for John Deere Wire Baler model 24W, 224W, 336, 346, 327, 337, 347, 328, 338, 348
$199.99Good used rebuilt John Deere OEM part #AFH202538. Ground to remove grooves, Repainted and includes new roller, Fits 24, 224, 336, 346, 327, 337, ...
View full details$199.99 -
Good Used John Deere Knotter for Models 328, 338, 348
$1,499.99Want a good quality used knotter, but don't want a "pick and pull" unit? We won't go out to a baler graveyard and snag any old knotter that will f...
View full details$1,499.99 -
Rear Clutch Plate for John Deere Models 24T, 224T, 336, 346, 327, 337, 347, 328, 338, 348
$69.99New Aftermarket part replaces John Deere OEM Part #E38904
$69.99 -
Good Used Bare Knotter Frame for John Deere Model 328, 338, 348
$649.99No need to pay big bucks for John Deere OEM parts. This 2 part knotter frame is in good used condition. It's been reconditioned and painted, and t...
View full details$649.99 -
Knotter Shield for John Deere Models 328, 338, 348
$139.99New Aftermarket parts Replacement for AE46856 and AE48456
$139.99 -
New OEM 2-Piece Knotter Frame for John Deere Model 328, 338, 348
$599.99John Deere OEM part #AE48451 TECH TIP: If you replace your broken knotter frame, then reinstall excessively worn parts, it could fail again....
View full details$599.99 -
Wire Twist Baler Hook for John Deere Model 326W, 336W, 346W, 327W, 337W, 347W, 328W, 338W, 348W,
$179.99John Deere OEM part #FH312159. Replaces part #E32458
$179.99 -
$139.99 -
Good Used Needle Guard for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$49.99Good used John Deere OEM part #E63932
$49.99 -
Side Shield for Late Model John Deere Square Balers 328, 338, 348
$149.99New Aftermarket part #3482- replaces John Deere part #AFH206110. Late models include serial numbers 300,000 and up.
$149.99 -
Auger Bearing Race for John Deere Models Late 328, 338, 348
$27.99New aftermarket part #3510 replaces John Deere OEM part #E50308. Serial number break for part- please call with serial number before ordering.
$27.99
The latest (and last, so far) series of John Deere small square balers, Many improvements over the previous models, such as updated tucker finger assembly and 2-piece knotter frame. We carry a large inventory of new aftermarket, new and good-used OEM parts, and updated assemblies.