Pickup Hex Bearing with Flangettes Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$129.99
Pickup arm bearing. New John Deere Baler OEM Part # AE28843
$129.99
John Deere Model 328, 338, 348 Parts
-
-
Good Used Front Clutch Plate for John Deere Models 24, 224, 336, 346, 327, 337, 347, 328, 338, 348
$199.99Good used, tech-certified John Deere OEM Part #E38906 and #E57134
$199.99 -
Drawbar Support Frame for John Deere Model 336, 346 ,327, 337, 347, 328, 338, 348
$799.99John Deere OEM Part #BE32440. Includes bolt and bushing. Needed for drawbar installation. (SUB FOR AE27318, AE30988 OR AE38409)
$799.99 -
Good Used Main Drive Sprocket (behind Slip Clutch) for John Deere Model 336, 346, 327, 337, 328, 338
$42.99Good used John Deere OEM part #E19123 Does not fit on John Deere Models 347 and 348
$42.99 -
Good Used Feeder Fork for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$229.99Good used John Deere OEM #AE49686
$229.99 -
Good Used Side Shield for John Deere Models 327, 337, early 8 series
$99.99John Deere good used OEM part #AE27423 Picture is representative- actual part may not have JD decal
$99.99 -
Twine Disc Holder for John Deere Models 14T, 24T, 336, 327, 337, 347, 338, 348
$189.99New OEM Part #FH312133
$189.99 -
OUT OF STOCK- Good Used Primary PTO Shaft & Yoke Assembly with New Cross Bearing for John Deere Model 336, 342, 346, 346WS, 327 337, 347, 328, 338, 348
$299.99Good used John Deere OEM assembly Part #AN104578 (used) and #E55209 (new) cross-bearing. Please provide model number and shaft width measurement (1...
View full details$299.99 -
Bearing for Main Drive Chain Idler Sprocket for John Deere Model 24T, 224T, 336, 346, 327, 337, 328, 338
$7.99Bearing for New John Deere OEM part #JD8570 Does not fit on John Deere Models 347 and 348
$7.99 -
Main Drive Chain Idler Sprocket for John Deere Model 336, 346, 327, 337, 328, 338
$92.99Main Drive- New John Deere OEM part #AE13630 Does not fit on John Deere Models 347 and 348
$92.99 -
$0.95
-
Wire Twist Baler Hook for John Deere Model 326W, 336W, 346W, 327W, 337W, 347W, 328W, 338W, 348W,
$179.99John Deere OEM part #FH312159. Replaces part #E32458
$179.99 -
Rear Clutch Plate for John Deere Models 24T, 224T, 336, 346, 327, 337, 347, 328, 338, 348
$69.99New Aftermarket part replaces John Deere OEM Part #E38904
$69.99 -
Knotter Shield for John Deere Models 328, 338, 348
$139.99New Aftermarket parts Replacement for AE46856 and AE48456
$139.99 -
$139.99 -
Good Used Needle Guard for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$49.99Good used John Deere OEM part #E63932
$49.99 -
Inflatable Pickup Gauge Wheel for John Deere Models 327, 337, 347, 328, 338, 348
$179.99New Aftermarket Part #3329. Replaces John Deere OEM part #AM30591. 16 X 6.50, 2 Ply tire. With grease zert.
$179.99 -
Auger Bearing Race for John Deere Models 336, 346, 327, 337, 347 and early 328, 338, 348
$44.99New aftermarket part #3508 replaces John Deere OEM part #E50308. Serial number break for part- please call with serial number before ordering.
$44.99 -
Good Used RH Spacer for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$39.99Good used John Deere OEM part #E42318. For use below 3351 (E47949) RH Plunger Guide
$39.99 -
Good Used Top RH Strap Spacer for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$19.99Good used John Deere OEM part #E44714. For use above E44706 RH Plunger Guide
$19.99 -
Worm Gear Shaft for 24T, 224T, 336, 346, 327, 337, 347, 328, 338, 348
$199.99New John Deere OEM Part #E66556
$199.99 -
Pickup Belt Drive Shield For John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$119.99Good used OEM part #E41906 for all John Deere Square Baler 6, 7 and 8 series.
$119.99 -
OUT OF STOCK- Good Used Hydraulic Bale Compression Assembly for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$1,399.99Includes 2 good used tested cylinders and tested pump- new hoses and oil reservoir. Does not include sprocket-sold separately. Original-style cylin...
View full details$1,399.99 -
Good Used Pitman Arm with New Bushings for John Deere Models 336, 327, 337, 328, 338
$359.99Good used OEM pitman arm part #AE46492, new OEM Pitman Pin Bushing- E15566
$359.99 -
Side Shield for John Deere Models 327, 337, 347 and Early 8 series
$139.99New Aftermarket part- replaces E42519 (picture is representative- may not have JD decal)
$139.99 -
$149.99
-
$249.99 -
Good Used Inspected Gear Box and Input Shaft (includes New Seals) for John Deere Models 336, 346, 327, 328
$1,899.99Fully inspected and includes 3 new seals- not a "pick and pull" part. Good used OEM part. Call for availability. NOTE: Please contact us for sh...
View full details$1,899.99 -
Large Drive Chain Sprocket for John Deere Model 336, 346, 327, 337, 328, 338 - Good Used Part
$40.99Good used John Deere OEM part #AE26326 (replaces part #AE13630 Does not fit on John Deere Models 347 and 348
$40.99 -
Heavy Duty LH Spindle Axle Extension Assembly for Thrower-Equipped Models 336, 327, 337, 328, 338
$489.99New aftermarket part. Includes hub, new bearings, seals and races. Reinforced metal in housing and bolt plate. You’ll receive the assembly fully g...
View full details$489.99 -
Main Drive Front 33 Tooth Sprocket for John Deere model 336, 346, 327, 337, 328, 338
$99.99New aftermarket part, replaces John Deere OEM part #AE26326
$99.99 -
0.036" Thick Plunger Strap for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$11.99New John Deere OEM part #FH312234
$11.99 -
Good Used Plunger Safety Stop Rod for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$81.99Good used John Deere OEM part # E54448. Includes front and back yoke (M80373).
$81.99 -
Good Used Main Drive Front Sprocket for John Deere model 336, 346, 327, 337
$42.99Good used John Deere OEM part #AE26326
$42.99 -
Good Used Secondary PTO Shaft Assembly for John Deere model 327, 328
$224.99VERY LIMITED INVENTORY- CALL BEFORE ORDERING! Includes new cross bearing.
$224.99 -
Plunger Safety Stop for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$74.99New Aftermarket part replaces OEM part #E1009. Includes new bushing.
$74.99
The latest (and last, so far) series of John Deere small square balers, Many improvements over the previous models, such as updated tucker finger assembly and 2-piece knotter frame. We carry a large inventory of new aftermarket, new and good-used OEM parts, and updated assemblies.