Plunger Knife Bolts (set of 3) for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$9.99
New John Deere OEM part #10H1235
$9.99
John Deere Model 327, 337, 347 Parts
-
-
Stationary Knife Shim (Metal) for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$19.99.024" / 0.61mm metal John Deere OEM part FH312283- sub for #E19708
$19.99 -
Small Plunger Bearing for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$29.99New Aftermarket part
$29.99 -
OUT OF STOCK-Intermittent Gear for John Deere Square Baler Models 24T, 224T, 336, 346, 327, 337, 347
$899.99New John Deere OEM Part #AE39977
$899.99 -
Stationary Knife Bolts (set of 3) for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$8.99New John Deere OEM part #10H1245
$8.99 -
Measuring Trip Arm for John Deere Baler Models 336, 346, 327, 337, 347, 328, 338, 348
$89.99New Aftermarket Part- substitute for John Deere OEM Part #AE34621, AFH202515
$89.99 -
Feeder Fork Stripper for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$109.99New aftermarket part- replaces John Deere OEM #E43669
$109.99 -
Inflatable Pickup Gauge Wheel Kit for John Deere Models 327, 337, 347, 328, 338, 348
$259.99Includes inflatable 16" x 6.50-8 wheel, bracket, and hardware. New Aftermarket Kit Part #3328-1
$259.99 -
PTO Cross Bearing for John Deere Model 336, 327, 337, 328, 338
$33.99New Aftermarket Part- replaces John Deere OEM AE22753
$33.99 -
$5.99 -
Good Used Pitman Arm with New Plunger Pin and Bushings for John Deere Models 336, 327, 337, 328, 338
$389.99Good used OEM pitman arm part #AE46492, new OEM Pitman Pin Bushing- E15566, and new Aftermarket Plunger Pin- 3405 (replaces FH312288)
$389.99 -
Rear Clutch Plate for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$64.99New aftermarket part- replaces John Deere OEM Part #E38906 and #E57134
$64.99 -
Feeder Fork Chain for John Deere Baler Models 14T, 336, 346, 327, 337, 347, 338, 348
$109.99New aftermarket part.
$109.99 -
Single Knotter Brake for John Deere Square Baler Model 336, 346, 327, 337, 328 and 338 Square Baler
$67.99One needle/ knotter brake shoe with metal bracket. New Aftermarket Part #3460. Replaces John Deere OEM part #AE48552
$67.99 -
Pickup Hex Bearing with Flangettes Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$129.99Pickup arm bearing. New John Deere Baler OEM Part # AE28843
$129.99 -
Longer Knotter Shaft Key (set of 2) for John Deere Model 14T, 214T, 24T, 224T, 336, 346, 327, 337, 347, 328, 338, 348
$3.99New Aftermarket part #3535- requires 2. Longer key for tighter fit in keyway
$3.99 -
$13.95 -
Good Used Main Drive Sprocket (behind Slip Clutch) for John Deere Model 336, 346, 327, 337, 328, 338
$79.99Good used John Deere OEM part #E19123 Does not fit on John Deere Models 347 and 348
$79.99 -
Good Used Front Clutch Plate for John Deere Models 24, 224, 336, 346, 327, 337, 347, 328, 338, 348
$199.99Good used, tech-certified John Deere OEM Part #E38906 and #E57134
$199.99 -
Stationary Knife Shim (Plastic) for John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$14.99New plastic John Deere OEM part #E19707-0.25mm
$14.99 -
Drawbar Support Frame for John Deere Model 336, 346 ,327, 337, 347, 328, 338, 348
$799.99John Deere OEM Part #BE32440. Includes bolt and bushing. Needed for drawbar installation. (SUB FOR AE27318, AE30988 OR AE38409)
$799.99 -
Good Used Feeder Fork for John Deere Baler Models 336, 346, 327, 337, 347, 338, 348
$229.99Good used John Deere OEM #AE49686
$229.99 -
Good Used Side Shield for John Deere Models 327, 337, early 8 series
$99.99John Deere good used OEM part #AE27423 Picture is representative- actual part may not have JD decal
$99.99 -
Twine Disc Holder for John Deere Models 14T, 24T, 336, 327, 337, 347, 338, 348
$189.99New OEM Part #FH312133
$189.99 -
OUT OF STOCK- Good Used Primary PTO Shaft & Yoke Assembly with New Cross Bearing for John Deere Model 336, 342, 346, 346WS, 327 337, 347, 328, 338, 348
$299.99Good used John Deere OEM assembly Part #AN104578 (used) and #E55209 (new) cross-bearing. Please provide model number and shaft width measurement (1...
View full details$299.99 -
Bearing for Main Drive Chain Idler Sprocket for John Deere Model 24T, 224T, 336, 346, 327, 337, 328, 338
$7.99Bearing for New John Deere OEM part #JD8570 Does not fit on John Deere Models 347 and 348
$7.99 -
Main Drive Chain Idler Sprocket for John Deere Model 336, 346, 327, 337, 328, 338
$92.99Main Drive- New John Deere OEM part #AE13630 Does not fit on John Deere Models 347 and 348
$92.99 -
$0.95
-
Rebuilt Wire Needle with New Roller for John Deere Wire Baler model 24W, 224W, 336, 346, 327, 337, 347, 328, 338, 348-VERY LIMITED SUPPLY-CALL BEFORE ORDERING
$195.99Good used rebuilt John Deere OEM part #AFH202538. Ground to remove grooves, Repainted and includes new roller, Fits 24, 224, 336, 346, 327, 337, ...
View full details$195.99 -
Wire Twist Baler Hook for John Deere Model 326W, 336W, 346W, 327W, 337W, 347W, 328W, 338W, 348W,
$179.99John Deere OEM part #FH312159. Replaces part #E32458
$179.99 -
Rear Clutch Plate for John Deere Models 24T, 224T, 336, 346, 327, 337, 347, 328, 338, 348
$69.99New Aftermarket part replaces John Deere OEM Part #E38904
$69.99 -
Knotter Shield for John Deere Models 328, 338, 348
$139.99New Aftermarket parts Replacement for AE46856 and AE48456
$139.99 -
$139.99 -
Good Used Needle Guard for John Deere model 336, 346, 327, 337, 347, 328, 338, 348
$49.99Good used John Deere OEM part #E63932
$49.99 -
Pickup Belt Drive Shield For John Deere Models 336, 346, 327, 337, 347, 328, 338, 348
$119.99Good used OEM part #E41906 for all John Deere Square Baler 6, 7 and 8 series.
$119.99 -
Good Used Pickup Stripper Bands for John Deere Models 327, 337, 347, 328, 338, 348
$29.99Made with metal. John Deere OEM part #E41839. Click here if you need pickup teeth also
$29.99
The first series of John Deere square balers to come in light-duty, medium-duty, and heavy-duty versions. We've got a large inventory of new aftermarket, new and good-used OEM parts, and updated assemblies.